How to Remove Shower Handle Without Screws?

If you’re looking to remove shower handle without screws, you may have noticed that newer models don’t have visible screws. While this design looks sleek and modern, it can make removing the handle a bit tricky. Fortunately, with the right techniques, you can remove your shower handle without screws.

Whether you need to replace your shower handle, repair a leak, change the faucet cartridge, or perform any other maintenance, this guide will provide you with the knowledge you need to remove your shower handle without screws. Keep reading to learn how to do it yourself.

Why Remove Your Shower Handle?

There are several reasons why you might need to remove your shower handle, such as:

  • Replacing a broken or faulty faucet handle with a new one
  • Changing the faucet cartridge
  • Locating and fixing a leak
  • Replacing a damaged filter
  • Cleaning the inner parts of the faucet handle

If you need to remove the shower handle, it is important to turn off the water supply and ensure that the valves are closed. Once you have removed the handle, inspect the cartridge for any damage or wear and replace it if necessary. When you reinstall the shower handle, ensure that it is properly aligned and tightened to prevent any issues with water flow or temperature.

How to Remove the Shower Handle Without Screws?

Single Shower Handle Without Screws

If you want to remove a single shower handle without screws, follow these steps:

  1. Locate the Button or Cap: The shower handle without screws will have a button or a cap. Find it, which is usually placed on top of the faucet or the side.
  2. Pop out the Cap or Button with a Flat Screwdriver: Insert your screwdriver inside the little gap and gently move it around the edge of the gap until you remove the button or cap. Handle them with care as they are delicate.
  3. Turn Off Your Water Supply: If you want to change the cartridge inside the faucet, you must turn off your water supply.
  4. Remove the Screw: Remove the screws, and to know the right wrench for loosening the screw, you will have first to determine the size of the screw. Close the drain or cover it with a cloth before you start removing the screw to prevent it from falling inside the drain.
  5. Remove the Handle: Pull out the shower handle. If you cannot pull it out with your bare hands, use a faucet handle puller or a pair of pliers. Wrap a towel around the base of the faucet handle before using the pliers to avoid scratches. Clean the dirt and replace the damaged parts. Reassemble the parts you have removed, and keep the disassembled components in a safe place.

Double Faucet Handles Without Screws

To remove double faucet handles without screws, follow these steps:

  1. Turn Off Your Water Supply: Turn off your water supply before starting the process.
  2. Turn the Handle’s Base: Hold the faucet’s handle arm and twist the handle’s base in an anticlockwise direction. Do not twist it in the wrong (clockwise) direction to avoid breaking the handle’s base.
  3. Remove the Screw: Remove the screw with your screwdriver after removing the faucet base.
  4. Pull Out the Faucet Cartridge: Check the cartridge to see if it is damaged or not. If the cartridge is damaged, remove and replace it with a nose needle plier.
  5. Reassemble the Components: Clean the dirt and replace the damaged parts. Reassemble the components back the same way you met them.

You can remove the shower handle without screws by following this step-by-step guide. Use a flathead screwdriver, pliers, or an adjustable wrench to remove the hidden screws. Twist the handle or pivot it to separate the handles. You can also use a special tool or tug the base to remove the shower handle without screws.

How to Remove a Lever Style Faucet Handle Without Cap or Screws?

If you have a lever-style faucet handle without cap or screws, you might be wondering how to remove it. Don’t worry; we’ve got you covered. Follow the steps below to remove your faucet handle safely and easily.

Remove the Button

The first step is to remove the hot and cold buttons on the handle. These buttons are delicate, so use a flathead screwdriver to remove them carefully.

Remove the Allen Key

Once you’ve removed the buttons, you’ll see an Allen key. Use an Allen wrench to remove the key. Be sure to keep the key in a safe place to avoid losing it.

Pull Out the Faucet Handle

After removing the Allen key, you can pull out the faucet handle. Be gentle, and don’t use too much force. If the handle is stuck, you can use a faucet handle puller to remove it. Once you’ve removed the handle, you’ll see the cartridge. If the cartridge is damaged, you can replace it. Be sure to lubricate the new cartridge before installing it.

By following these simple steps, you can remove your lever-style faucet handle without a cap or screws quickly and easily.

Frequently Asked Questions (FAQs)

If you’re experiencing mineral deposits in your faucet handle, try using distilled white vinegar or lemon to get rid of them. For hard-to-pull shower handles, you can use a pair of pliers or a faucet handle puller. The faucet cartridge is responsible for controlling the flow of water. To remove the base of a double faucet handle, twist it in an anticlockwise direction. When it comes to cleaning and maintenance, there are various styles, designs, and finishes to choose from. If you’re dealing with corrosion or rust, a rust cleaner can be helpful. Keep your fixtures looking their best by regularly cleaning and removing mineral deposits.


Removing a shower handle without screws can be a daunting task, but it is not impossible. There are different methods of removing shower handles without screws, and each method requires a different approach. The three methods discussed in this article are effective and can help you remove your shower handle without stress.

About author

Robin Stephen

At Guridio, Robin provide real information about bathroom products, bathroom maintenance, bathroom gadgets, bathroom appliance, bathroom decor idea, and many more.

Related Topics

Leave a Comment